|
With the launch of Naim's first custom designed and manufactured mains
cable system, the most fundamental of all audio hardware items has hit
centre stage. The Power-Line consists of a mains plug, a mains cable and
an IEC connector. Each element incorporates features never before seen
in an audio mains cable, and, like Naim's Hi-Line interconnect cable,
the Power-Line represents a genuine advance in high-end audio engineering.
The Power-Line's unique design is the result of hundreds of hours of
experimentation, research and listening aimed at identifying and optimising
the critical elements of audio mains power cables. Mechanical energy
transmission, eddy current propagation and conductivity factors were all
identified and numerous steps taken within the design to eliminate any
negative influence.
The Power-Line mains plug features a thermoset resin case carrying floating
pins that align for enhanced contact area. The stripped cable ends are
secured by specially profiled clamp screws and the cable is both decoupled
and clamped by an ingenious die-cast component that includes measures to
suppress case eddy currents.
The Power-Line cable itself is custom manufactured with 4mm² cross section
copper conductors, individual dielectric insulation chosen for its sound
enhancing electrical properties, and a final rubber outer that provides both
high levels of inherent mechanical damping, and the correct stiffness to aid
dressing on installation.
Completing the Power-Line is an IEC inlet plug that continues many of the
decoupling and electrical continuity themes of the mains plug. It features
floating contacts, combined decoupling and clamping, double wiper contacts
and case eddy current suppression.
The Power-Line brings gains in all areas of system performance with its influence
increasing as it is used on each component in a system. It represents a striking
and significant upgrade for all Naim hi-fi systems.
Power-Line launched with a UK specification mains plug and both
EU and US versions will follow soon with versions for other markets following
these.
Specifications |
| Naim Cable |
|
| Conductors |
4mm², Copper, 3-core twisted |
| External Diameter |
8.8mm |
| Approvals |
UL 20841 |
| Standard length |
2.0m |
| Naim Mains Plug |
Manufactured & Approved to BS1363-1 |
| Naim IEC Connector |
Tested & Certified to EN60320-1 |
|
|
|